Choose an infrared ceiling panel with LED lighting
An infrared panel with lighting combines electric radiant heating and LED light. The Termofol TF-SP400 and TF-SP800 are ceiling models; the TF-LG400 is a heated wall mirror. Choose the mounting position and required heating output first, then compare lighting and controls.
Request heating and installation advice for your room. Include dimensions, ceiling height, insulation and whether you need primary or supplementary heating.
Compare two ceiling panels with LED lighting
The TF-SP400 and TF-SP800 include a wireless thermostat. Heating and lighting can be controlled separately, with adjustable brightness and a choice of 3000, 4000 or 6000 K light colour. The wattages in the table describe the heating element; LED consumption is additional. Check the current product contents and installation instructions before ordering.
Will a ceiling panel fit your planned installation?
An existing light point is a starting point for planning. Suitability depends on its supply, wiring, controls and the chosen panel’s instructions. Have these checked before installation. A wireless thermostat does not remove the panel’s need for an electrical power supply.
- Ceiling and support: tell us whether you have concrete, timber, plasterboard or a suspended ceiling. Have the bracket fixing position assessed; a finish board alone does not establish sufficient load capacity.
- Room and heating requirement: provide length, width, height, insulation, glazing and hours of use. Specify primary or supplementary heating.
- Lighting and controls: say whether the panel replaces a lamp, which light colour you want and whether several panels need coordinated control. Ask about light output and LED wattage as well.
Request a proposal for your ceiling. Include photos of the room, fixing location and existing light point. For bathrooms, also show the shower, bath and basin so the permitted installation position can be assessed.
How much heating output does your room need?
Required output depends on room volume, insulation, glazing, ventilation, target temperature and use. A 400 W panel is not automatically enough for every small bathroom, nor is an 800 W panel sufficient for every living room. Primary heating must cover the room’s heat loss. Supplementary heating also requires a clear view of the occupied area.
If you already have suitable lighting, compare ceiling infrared panels or the complete infrared panel range.
A heated LED mirror is a different option
The TF-LG400 heated mirror measures 60 × 80 cm and has 400 W heating output, LED lighting and an integrated thermostat with touch controls and Wi-Fi. It is a wall model, not a ceiling panel. Compare infrared mirrors when a mirror is your main requirement.
Bathroom installation and controls
Follow the exact model’s manual and keep the specified clearances free. The manufacturer lists ceiling mounting and IP44 for the TF-SP400 and TF-SP800. That rating does not permit installation in every bathroom zone. Have the position and electrical connection assessed against local installation requirements.
A wireless thermostat does not automatically mean Wi-Fi app control. Check the included controls, mounting parts and connection requirements. Choose additional thermostats or receivers only when they are compatible with your model.
What does an infrared panel with LED consume?
Heating output in kW × actual operating hours = heating consumption in kWh. A 400 W heating element running continuously for one hour uses 0.4 kWh; an 800 W element uses 0.8 kWh. Add the LED consumption and multiply by your own electricity tariff to estimate cost.
The thermostat switches the heater according to temperature. Insulation, outdoor temperature, settings and use determine operating time. These examples do not predict daily consumption or savings.
Frequently asked questions
Can the lights work without the heating?
Yes. The TF-SP400 and TF-SP800 allow lighting and heating to be controlled separately.
Do I need to buy another thermostat?
The offered TF-SP400 and TF-SP800 include a wireless thermostat; the TF-LG400 has an integrated thermostat. Check the product contents and ask for advice when expanding a system.
Can one panel heat the whole room?
Only if its output and position match the heating requirement. Have primary heating assessed rather than choosing solely by floor area or the dimensions of your old light fitting.
Get advice on output, mounting and lighting before selecting your panel.